Monthly Archives: July 2017

Consider Before You Buy Plantation Shutters

However, if you are going to purchase plantation shutters for the first time, you may want to consider the following tips.

1. The type of wood

Since poplar wood is light, straight, and smooth, it’s a great choice for plantation shutters. The average height of a poplar tree is 160 feet and the trunk can be as much as 80 feet in diameter. So, it’s a good idea to opt for this type of wood.

2. Poly or Wood

Most of clients go for wood shutters because of their advantages over the artificial material known as poly.

As far as strength goes, wood is stronger and lighter. So, wooden shutters can be up to 37 inches in width. So, you won’t need more than a few panels for the window openings. Aside from this, wood gives you a lot of other benefits as well.

3. Louver Size

The size of most of shutters is 3.5 louvers. But there is a rise in demand for louvers that measure 4.5 louvers due to sliding glass doors and bigger windows. Actually, people want modern interior design as well as openness.

4. Midrail

If you don’t know, midrail is a horizontal plank. Over the midrail, the louvers open and close without relying on the louvers that are under the midrail. Many buyers like midrails since they leave the upper section open to let more light in and leave the lower section shut for privacy reasons. Moreover, a midrail is an ideal choice should you have metal casings.

5. Vertical Tilt Bar

You will find shutters that feature “hidden tilt”. In this type of shutters, the frontal wooden tilt bar is missing. In its place, you can see a metal tilt bar, which is almost invisible. So, you can have more visibility and open space.

6. Sliding Glass Doors

As far as sliding glass doors is concerned, plantation shutters are an ideal choice. For a consistent feel and look, your house should have shutters. Actually, plantation shutters are fixed on a track to let the panels open without any hindrance.

7. Cost Of The Shutters

Usually, plantation shutters are sold by the square foot. However, by paying a bit more, you can benefit from other options, such as hidden tilt, stain finishes, and specialty shapes. You should be ready to spend a good deal of money to get the required shutters.

8. Procedure

Plantation shutters are also made to order. First of all, the sales representative will visit your house to measure the doors and windows to give you a proposal. Then the installers will do a detailed measurement. Once the product is made, it is handed over to the finishing department. In this department, the product is sanded, primed and painted. Finally, they are installed.

Tips For Quick Home Maintenance

1.Fixing a chair

Are you trying to fix an old chair? If so, we suggest drilling pilot holes and driving screws via the rungs bottom and into the chair legs.

2.Vinyl Door or Window

If your vinyl doors or windows don’t open properly, the channels may have accumulated gunk. At times, even clean doors and windows may bind. You may spray dry spray lubricant on the target areas and then use a rag to wipe it off. Using oil lubricants is not a good idea as they can catch dirt damaging the vinyl.

3. Repairing a Shutoff Valve

If the shutoff value is faulty, you can get it replaced. But if you can’t, you should go to the nearby hardware store to buy a good replacement washer. Remove the grit from the valve and fit the new washer. This will fix the problem.

4.Loose Showerhead

If you want to fix a problematic showerhead or a wobbly pipe, you can use some expanding foam. With the foam, you can encase the pipe and fix it. This will remove the wobble.

5. Use a Smoke Detector

If you don’t have enough time or money, you may want to cover the ceiling hole with a smoke detector. You don’t need to patch the hole.

6. Cabinet doors

If your cabinet doors don’t stay shut, all you have to do is use a magnetic door catch. You can also go for a roller-style one.

7. Squeaky Floors

If you want to repair a squeaky floor, use a stud finder to find the floor joists. Next, you can drive in a screw via a pad, carpet and the subfloor to reach the floor joist. Just make sure that the upper part of the screw has no threads. Ideally, you may want to use trim screws since they have bigger heads. If this is the case, you may want to pull up the screw and then tighten it again.

8. Remove Water Stains

Before repainting the ceiling, you may want to try out this trick. You can use a mixture of water and bleach and then wait for a few days. If the stain is old, you can try a mold and mildew product. The stain will be gone within 24 hours. This trick may work both on textured and flat ceilings.

9. Wallpaper Seams

To fix a wallpaper seam, you can soak a rag in lukewarm water and then apply the paste around the seam. You may want to hold the rag for a couple of minutes and then open the seam a bit for more space for the seam sealer. Put the liquid into the gap and then push the paper against the wall using a roller

 

Tips for Maintaining Vinyl Siding

Tips for Maintaining Vinyl Siding

1. Be sure to keep any shrubbery around the home trimmed back so that the branches cannot poke or scratch the siding. Failing to do this will result in the coating on the siding being scratched, nicked or punctured thus making the siding susceptible or mildew and mold.

2. No matter what type of siding you have on your home. It is important to take time to clean it, at least once a year. With vinyl, you can do this by using a soft scrub brush, soapy water, and a water hose for rinsing. Yes, you can use a power washer but be sure to keep it at the lowest setting and take care not to use excessive force.

3. In the event that you do discover dents, punctures or scratching, replace the piece as soon as possible. Be sure in doing this, that you use a siding removal tool so you can avoid damaging the surrounding pieces of siding.

4. Make time to clean your gutters- especially during the spring and fall or after a heavy storm as this will help keep the siding clean and prevent risk of damage to the siding.

It is also worth noting that while most people opt to have vinyl siding in a color they like, it you purchase a home with siding in a color you do not like, it can be painted. It will take two coats of 100% latex paint and the paint will need to be re-applied every two years in order to always look great.

Maintaining your vinyl siding is not a full-time job, but it does need the occasional repairs or cleaning. Don’t just assume that your home’s siding is a one and done aspect of ownership. Take time throughout the year to ensure that your siding will last as long (if not longer) than you were promised at installation. If you are new to vinyl, then be sure to talk to a local siding company and find out what they recommend for your particular type and style of home siding.

Make Your Home a Quieter Place

The evil effects of noise are that it can mess up your sleep, add to your stress, infringe on your privacy and in a nutshell it is hampering the quality of life we are living. Fortunately, we are lucky that there is a number of soundproofing or acoustic treatments that you can take help from to alleviate the problem. The acoustic barriers can efficiently help folks to get rid of this serious issue. Before, we proceed it is also important to know how sound actually works?

The houses today are constructed on the basis of modern, light-weighted and open-floor plans wherein it becomes difficult to find a little peace and quiet environment. In most of the houses, the walls are removed to increase the available space, kitchens are filled with larger appliances, and rooms are surrounded by home theatres making noise an essential part of our lives.
Here are some helpful techniques for making your home a quieter place:

  • Cut down on noisemakers- Consider buying quiet appliances for your home including house fans, kitchen appliances etc. Buying quiet appliances is even more beneficial if they are to be kept nearby living or sleeping areas. Maintenance of existing appliances is also an important part of the equation. If you find something unusual, get it checked or repaired by the technician as soon as possible.
  • Use sound absorbing materials- The material that helps to reduce and absorbing the unwanted sound are something that every house owner would love to have. There are a lot of things that will work as a barrier that reflects and absorbs the noise entering your house. These acoustic barriers are quite helpful in minimizing the outdoor noises and absorbing the interior sounds. Ensure getting a spec sheet prepared by the tradesman so that you can check and approve it before its installation.
  • Install sound blocking doors- The largest opening in a house is its doorway. And a lot of sounds enters from this way. Thus, it is better to install weatherstrip or solid doors to effectively block the unwanted sound rays entering your house. The solid doors are quite expensive because of their thickness and are also available in a broader selection of elegant designs.
  • Weatherstrip interior doors- The actual sound doesn’t come through the door, it comes around the hollow spaces left between the doors. Thus, it is beneficial to install weatherstripping or door soundproofing to seal that space using adhesive-backed high-density foam tape. This will block the noise coming from outside.